Wisman High Voltage Power Supply Co.,LTD.

     Main features: hot polarity can be reversed, uninterruptible power state, the output voltage is positive and the negative can be instantly reversed, the output electrical control automatically the high voltage into a negative high voltage.

   

    Wisman  CZE series is a high-performance 19 "standard rack-mounted high-voltage power CZE series has perfect protection system. CZE Series Division I has patented technology, high reliability, high voltage power supply, remote control or local control, front panel voltage and current high-voltage output overvoltage, overcurrent, short circuit protection, arcing, over temperature protection and safety of each other lock function. A wide range of adjustment and a flexible number of optional features.

Typical applications:
Electrophoresis, electrostatic field experiment, X-ray tube, electrospinning, electrostatic flocking, capacitor charging, industrial equipment, electronic components aging.
Insulation testing, ion implantation, electrostatic, laser, and scientific research.
 Optional features:
AOL overload shutdown FG suspension to
CPC constant power output FGLL floating low-leakage
LR low ripple NSS slow start
SS (X) custom soft-start ATP had the power to shut down
CPC constant power AT arc shutdown
DB 2-output NAD arc protection
FCV voltage fine-tune the RFR remote reset
Specifications:
Input: AC220 ± 10% (Wiring AC110V optional) maximum current of 10A.
Output: 1KV to 65KV variety of the highest voltage output selectable, 0V to the maximum voltage can be adjusted.
The voltage control: the internal power supply: power supply comes with multi-turn potentiometer output voltage is set between 0V to the maximum voltage.
External remote control: external 0 to 10V control signals can be output from 0V to the highest output voltage.
The current control: internal power: The power supply comes with multi-turn potentiometer can be current setting from 0 to maximum current.
The external remote control: external 0 to 10V control signals may be current
Set from 0 to maximum current.
Voltage regulation rate:
The relative load: 0.005% +5000 mV (no load to rated load)
The input: ± 0.005% +500 at mV (input voltage variation of ± 10%)
The current adjustment rate:
The relative load: 0.01% ± 100uA (no load to rated load)
The input: ± 0.005% (the changes in input voltage ± 10%).
Ripple voltage: 0.1% P-P +1 Vrms.
Temperature Coefficient: 100ppm, higher temperature coefficient can be customized.
Stability: less than 100ppm boot half-hour after hour.
Ambient temperature: 0 to +50 ° C
Storage Temperature: -40 ℃ to +85 ℃.
The voltage and current instructions: four digital panel meters, under the conditions of the rated output accuracy of 1%.
Dimensions:
3W to 300W:
1-65KV high-88mm (2U) width 483mm, length 483mm
Connectors:
High-voltage output connectors: recessed insulated catheter and probe into the high voltage cable through the metal connector connection. The high voltage cable comes standard with 1 m.
Input and output connectors: DB25 contains a control and display signals.
Remote control of output voltage and current:
Potentiometer can be connected to power internal 10V voltage reference output voltage and current remote control.